Why All Terrain Demining Capability Must Be Demonstrated in the Field

Why All Terrain Demining Capability Must Be Demonstrated in the Field

Remote operation can help keep personnel away from explosive hazards, but a demining machine must also be able to reach the working area and perform its task in the conditions it encounters.

Steep slopes, dense vegetation, exposed roots and uneven ground can present challenges for any unmanned ground vehicle (UGV). In mine action, however, reaching a location is only part of the challenge; the machine must also be able to position and operate its equipment effectively once it gets there.

A recent report from South Korea illustrates why terrain capability needs to be considered alongside the machine’s intended task, attachments and operating conditions.

Lessons from South Korea’s DMZ

On 2 November 2026, ChosunBiz reported that South Korea planned to deploy additional KR-1 Type 2 explosive ordnance robots to a military unit responsible for an area of the Demilitarised Zone (DMZ).

According to the report, the remotely operated Type 2 has a mine detection panel that allows it to locate and mark suspected buried mines, it does not directly remove them.

The article also described concerns about its use in steep, heavily overgrown terrain. Rocks, roots, vines and undergrowth can restrict movement and make it difficult to keep the detection panel close to the ground. The report said the robot was not designed to clear trees or undergrowth and that the South Korean Army was reviewing options suited to field conditions, including additional unmanned equipment for tree removal.

The KR-1 is a detection system operating in a specific military environment. Its challenges should not be treated as a direct comparison with Armtrac’s mechanical clearance machines; they do, however, highlight a question for anyone selecting equipment for hazardous ground: Can the complete system perform its intended task on the terrain where it will be deployed?

Mobility is only the starting point

A vehicle may be able to travel over rough ground, but its operational usefulness also depends on what happens when it reaches the work area.

For example, a slope can affect a machine’s stability and the position of its working attachment; rocks and roots may interfere with movement or prevent a tool from following the ground as intended. Deep vegetation can hide obstacles, restrict visibility and make access to the suspected hazardous area more difficult.

For a mine action organisation, these factors can influence the choice of machine, the way a task is planned and whether additional equipment or methods are needed.

Field assessments should therefore consider the complete operating environment, including:

  • The steepness and consistency of the ground
  • Rocks, roots, soft soil and other obstacles
  • Vegetation density and the work needed to manage it
  • The type of hazard and the intended clearance method
  • The working position and limitations of the selected attachment
  • Access, maintenance and recovery arrangements

A single headline specification cannot describe every combination of these conditions.

Managing vegetation and preparing the ground

Overgrown land presents a particular challenge; vegetation can obscure the ground, restrict access and make it harder for operators to assess the area ahead.

Mechanical equipment can support vegetation management as part of a planned operation. Armtrac supplies machines with a range of toolkits, including flails, tillers and strimmers mounted on a robotic arm. Depending on the equipment and task, these can be used to address vegetation and process the ground as part of mechanical clearance operations.

The choice of attachment matters; a team assessing a site needs to consider the density and type of vegetation, ground conditions, suspected explosive hazards and the intended follow-on work. Vegetation management and mine detection are different tasks and the appropriate approach depends on the operational plan.

Attachment performance matters as much as vehicle movement

The South Korean example also draws attention to the relationship between a vehicle and its working equipment.

A ground following detection panel has different requirements from a mechanical flail or tiller. Even so, each depends on the ability to operate in a suitable position under the conditions encountered. A vehicle that can cross a patch of uneven terrain may still need to slow down, reposition or use a different approach before its attachment can work effectively.

For operators and procurement teams, this is a reason to assess the machine and attachment together. A useful demonstration should reflect the intended task and, as far as practical, the slopes, soil, obstacles and vegetation expected in the field.

It should also consider the manufacturer’s operating limits and the organisation’s own procedures. A successful demonstration on one type of ground should not be assumed to prove performance on every site.

Selecting an Armtrac platform for the task

Armtrac designs and manufactures a range of remotely operated machines for demining, explosive ordnance clearance and counter-IED operations. Different platforms and toolkits allow organisations to consider the size of the working area, the task and the conditions before selecting equipment.

Armtrac 20T C-IED Robot Mk2

The Armtrac 20T C-IED Robot Mk2 is a remotely controlled UGV that can be fitted with a range of toolkits, including a demining flail or tiller and a rear robotic arm with different attachments including strimmers. This flexibility allows the platform to be configured for different operational requirements.

Armtrac 75T-230

The Armtrac 75T-230 is a mid-range demining machine available with a hydraulically operated tiller or a flail. It can be operated remotely, while a cabbed configuration is also available.

Its combination of platform and toolkit options makes it relevant for organisations assessing mechanical clearance and related engineering tasks. Suitability for a particular site still depends on the terrain, hazards, configuration and operating plan.

Armtrac 400

The Armtrac 400 provides a heavier platform for larger-scale mechanical clearance. Armtrac describes the machine with a three metre tiller and remote operation capability. As with any machine, its dimensions, working attachment and access requirements need to be considered against the conditions at the proposed site.

Planning for support and recovery

Terrain can also affect what happens when work is interrupted. A machine may need maintenance, a change of attachment or assistance if it becomes immobilised. In a hazardous area, these situations need careful planning because access for personnel and supporting equipment may be restricted.

Before deployment, teams should consider how the machine will be maintained and how recovery would be managed under their site specific procedures. Armtrac provides service and support options at different levels depending on budget and recommends maintenance of its platforms and demining toolkits by an operator or mechanic.

Matching equipment to real conditions

The lessons from South Korea’s DMZ are relevant beyond one robot or location. They show why descriptions such as “all terrain” need to be supported by a clear understanding of the terrain, the machine’s working limits and the job it is expected to perform.

For mine action teams, the most useful question is whether the complete system/platform, attachment, operator and support arrangements is appropriate for the task and the conditions on site.

Armtrac works with organisations looking for mechanical demining and explosive ordnance clearance equipment suited to their operational requirements. To discuss a machine or toolkit, contact the Armtrac team.