Mine Roller for UXO Disposal

Mine Roller for UXO Disposal

Mechanical demining is an integral component of humanitarian mine action.

At Armtrac that’s exactly what we believe and also exactly what we design and manufacture too. Mechanical Demining Equipment.

What kinds of mechanical Demining Equipment are there?

There are many different types of mechanical Demining Equipment available, but in this article we will focus our attention to the Mine Roller, commonly used for proving the absence of explosive ordnance on route clearance and sometimes used in Mine Clearance activities.

The Mine Roller

Mine rollers are a working component attached to a Mechanical demining Machine. Once attached, a mine roller can be pushed or pulled to actuatemines. Mine rollers used in this way can often clear a safe path for other vehicles following in its tracks. A mine roller can also be used to clear ground that has already had a visual inspection, identifying unexploded devices by simply rolling over them.

More details about the Armtrac Mine Roller

Our specific mine roller can be seen here: http://armtrac.net/products/. It can be used at up to 50 KPH when fitted to the Armtrac 100 (also shown on this page). It is a full width proving device using two wheel banks each comprising of 7 rollers.

You can also download the specification sheet for the Armtrac Mine Roller here: http://armtrac.net/wp-content/uploads/ARMTRAC-Roller.pdf

If you need to discuss your specific requirements, we would be happy to hear from you. Please complete the form found here: http://armtrac.net/contact/ and we will call you back as soon as possible.